Products Description
| Material | phenolic foam |
| Density | 11-20kg/m³ 40-50kg/m³ |
| Pore space | 90-98% |
| PH value | 6.5-7.4 |
| Electrical conductivity(ds/m, 20C degrees) | 0.55 |
| Shrinkage | < 0.01% |
| Compressive strength(kpa) | 20-31 |
| Fully available water(%vol) | 50-61% |
| Water retention time(h) | 72-144 |
| Water retention capacity(%vol) | 50-91% |
Advantages with Tenlead Small Grow Cubes:
-
The organic cultivation of vegetables at ease. Vigorous growth, higher yields.
-
It is available in multiple sizes and shapes for various hydroponic applications.
-
Its suitable for the early vegetative stage of larger plants before transplanting.
-
Meet the growth space required by the developed extensive root system.
-
Pests and diseases are easier to get rid of than in soil because of the container's mobility.
-
No dirt, clean and sanitary. No mess and no fuss - just excellent results.
-
You can start your plant in a hydroponic growing cube and transplant it onto your planting trough or it can be cut to size for those DIY hydroponic enthusiasts.
Factory
Steps for Propagation
1. Place sheets into trays:
If your primary watering method uses overhead irrigation, use a solid-Bottom tray with drain holes. However, if your primary method uses sub-irrigation, use a web-bottom tray.
Note: DO NOT use a solid tray without drain holes because excess water needs to be drained freely.
2. Place seed(s) in the hole:
Seeds can be placed manually or via mechanical equipment in the single- or multi-seed holes when the sheet is either dry or wet.
3. Saturate Growing Medium:
For optimal results, sheets should be completely saturated without any dry areas. Saturation is best accomplished through a combination of float saturating and overhead watering.
If the seeds are sown while sheet is dry, lightly water the top of the sheets to set the seed into the dibble holes.
Set the trays of sheet into a tub of complete nutrient solution and let the foam completely saturate until the growing medium or sheet is slightly below the water surface.
Note: DO NOT force the growing medium under water.
4. Germination:
In the case of lettuce or most herbs, place the sheets in a dark room at temperatures of between 18.8 to 20?C. The trays need to be moved from the dark room to the greenhouse at 48 hours after the initiation of the germination process. Leaving the trays beyond the
48 hours can lead to stretching of the seedlings. During seedling production, pull the shade curtains in the afternoon hours during the summer months. Provide supplemental lighting during the winter months.
Tip: To make it more convenient to handle at transplant time, consider using a sharp knife to cut the sheets into smaller sections.
5. Transplant:
Wait until you have at least two true leaves and tap root coming out of the bottom of the matrix. Typically, the seedlings are ready for transplant in 12 to 14 days during the summer and 16 to 18 days during the winter. Separation occurs by using a top-down motion.
Storage:
Store unused sheet in a dry location away from direct sunlight.
Our advantage
Sample evaluation!
Provide sample and trial order are accepted for the quality strictly.
Save Effort!
This hydroponic growing cubes not only make the vegetables more durable, saves nutrient solution, but also makes vegetables grow better.
Material!
Eco-friendly phenolic foam material, can be planted directly into the ground and garden.
Services!
Support OEM and ODM.
Hot Tags: Small Grow Cubes - 25x25x3cm Each Cube, manufacturers, suppliers, factory, for sale
